Pico Logic Analyzer 8 channels · UART · I2C · SPI
Not connected

Set up your Pico

Four steps, about a minute. You only flash once.

  1. 1Pick your board

  2. 2Download the firmware
    Download .uf2
  3. 3Flash it

    Hold the BOOTSEL button while you plug the Pico into USB, then let go. A drive called RPI-RP2 opens. Drag the file onto it. The Pico restarts on its own when it's done.

  4. 4Connect

    The browser lists only Raspberry Pi devices, so pick the one it shows. Works in Chrome and Edge on a computer.

Nothing captured yet

Connect a Pico running the analyzer firmware, then press Capture. New to this? Open the firmware setup first.

Decoders

Add

Measurements

Decoded